Change font size
It is currently Mon Dec 18, 2017 3:09 pm


Post a new topicPost a reply Page 1 of 2   [ 15 posts ]
Go to page 1, 2  Next
Author Message
 Post subject: Kinect One adaptor Q
PostPosted: Wed Jun 21, 2017 10:09 pm 

Joined: Tue Jun 21, 2011 2:11 am
Posts: 13
Hi

Just purchased a 2nd hand Kinect One (model 1520) with cable (no box or instructions etc).
I believe I need an adapter for connecting to my PC's USB port.
Q is: Would the "Kinect One S" be the correct adapter? (its the only one I can find listed online) or is something else required?

Thanks for any advise;)


Top
 Profile  
 
 Post subject: Re: Kinect One adaptor Q
PostPosted: Fri Jun 23, 2017 7:32 am 
iPi Soft

Joined: Wed Jan 11, 2012 6:12 am
Posts: 1941
Location: Moscow, Russia
Hi
You need this adapter.


Top
 Profile  
 
 Post subject: Re: Kinect One adaptor Q
PostPosted: Fri Jun 23, 2017 6:20 pm 

Joined: Tue Jun 21, 2011 2:11 am
Posts: 13
Thanks;)


Top
 Profile  
 
 Post subject: Re: Kinect One adaptor Q
PostPosted: Mon Jul 03, 2017 10:37 pm 

Joined: Tue Jun 21, 2011 2:11 am
Posts: 13
Aaaaaargh

I am in Australia, the adapter recommended is incompatable with Australian power supply.

Anyone know what planet this thing is from so I can now waste money on the correct power supply?


Top
 Profile  
 
 Post subject: Re: Kinect One adaptor Q
PostPosted: Mon Jul 03, 2017 11:09 pm 

Joined: Tue Jun 21, 2011 2:11 am
Posts: 13
Okay looks like a type 'A' pin (USA), now all I need is an adapter for the adapter.
Good thing I opted to only go with a one camera setup.


Top
 Profile  
 
 Post subject: Re: Kinect One adaptor Q
PostPosted: Wed Jul 12, 2017 6:58 pm 

Joined: Tue Jun 21, 2011 2:11 am
Posts: 13
Finally got the Kinect adapter & power adapter sorted
but
The Kinect SDK will not install, I followed the recommendation to switch of UAC but this made no difference.
Has anyone else run into this issue?

Windows 7 64bit
i7
8gig ram
UAC (off)


Top
 Profile  
 
 Post subject: Re: Kinect One adaptor Q
PostPosted: Thu Jul 13, 2017 1:51 am 
iPi Soft

Joined: Wed Jan 11, 2012 6:12 am
Posts: 1941
Location: Moscow, Russia
Kinect 2 SDK will only run on 64-bit Windows 8+. Check this page in case you've missed some other requirements.
https://developer.microsoft.com/en-us/windows/kinect/hardware-setup


Top
 Profile  
 
 Post subject: Re: Kinect One adaptor Q
PostPosted: Thu Jul 13, 2017 5:25 pm 

Joined: Tue Jun 21, 2011 2:11 am
Posts: 13
I'm using sdk1.8 which is supposed to work with Win7.


Top
 Profile  
 
 Post subject: Re: Kinect One adaptor Q
PostPosted: Fri Jul 14, 2017 12:56 am 
iPi Soft

Joined: Wed Jan 11, 2012 6:12 am
Posts: 1941
Location: Moscow, Russia
Kinect SDK v1.x supports first-generation Kinects (Kinect for XBOX 360, Kinect v1 for Windows). Kinect for XBOX One is a second-generation device which requires Kinect SDK v2 for operation.


Top
 Profile  
 
 Post subject: Re: Kinect One adaptor Q
PostPosted: Mon Jul 17, 2017 6:16 am 

Joined: Tue Jun 21, 2011 2:11 am
Posts: 13
Okay

1 Downloaded SDK 2.0 to my other (heavier & harder to move Win10 box) .
2 Installed SDK 2.0
3 Plugged in the Kinect (usb 3 & power) which results in 3 red lights & a white lighted logo on the right of the kinect.
4 The SDK instructions say that installation will complete after it is connected but I am getting no indication that this is happening.

Checked the Devices and Printers and the Kinect is listed as Unspecified.
Checked the Device Manager and he Kinect is listed.

Q: Is this what is expected in regards to installation?
(ie: Is there anything further in regards to installation?)


Top
 Profile  
 
Display posts from previous:  Sort by  
Post a new topicPost a reply Page 1 of 2   [ 15 posts ]
Go to page 1, 2  Next


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


Powered by phpBB® Forum Software © phpBB Group
610nm Style by Daniel St. Jules of Gamexe.net