ipisoft.com
https://forum.ipisoft.com/

ps move why?
https://forum.ipisoft.com/viewtopic.php?f=2&t=8044		 Page 1 of 1
Author:  baby3w [ Tue Jul 02, 2013 12:19 am ]
Post subject:  ps move why?
why

Attachments:
a (2).jpg
a (2).jpg [ 38.01 KiB | Viewed 37403 times ]
Author:  baby3w [ Tue Jul 02, 2013 12:43 am ]
Post subject:  Re: ps move why?
Upper body is always twisted
This has nothing to do with PSMOVE
Often this is so, what changes

Attachments:
c.jpg
c.jpg [ 37.34 KiB | Viewed 37392 times ]
b.jpg
b.jpg [ 19.59 KiB | Viewed 37399 times ]
Author:  vmaslov [ Tue Jul 02, 2013 2:51 am ]
Post subject:  Re: ps move why?
baby3w wrote:
why

Please read the instructions carefully:
http://wiki.ipisoft.com/Getting_started_with_motion_controllers#Tips_on_action_video
I do not see that actor is aiming at a camera.

baby3w wrote:
Upper body is always twisted
This has nothing to do with PSMOVE

You can send us the project (with video) in which you are experiencing this tracking issue, so we can do the tests and provide some tips.

baby3w wrote:
Often this is so, what changes

You can apply motion data only after you matched the motion controller with a camera and attached to a bone.
Author:  baby3w [ Tue Jul 02, 2013 8:25 am ]
Post subject:  Re: ps move why?
I just aligned with a camera, the moment? No need to press anything?

That's it?

Understand this right?
Author:  baby3w [ Tue Jul 02, 2013 8:27 am ]
Post subject:  Re: ps move why?
I should follow the body, or the first track PS MOVE？

Attachments:
2.jpg
2.jpg [ 72.63 KiB | Viewed 37380 times ]
1.jpg
1.jpg [ 60.4 KiB | Viewed 37380 times ]
Author:  baby3w [ Wed Jul 03, 2013 4:14 am ]
Post subject:  Re: ps move why?
I really calibrated

But it seems that what is missing

It is really very difficult to

I do not know the video camera aligned with what he intended, or what, I align the camera at the "START"

http://www.youtube.com/watch?v=VLp8qw2OBvE

Attachments:
p2.jpg
p2.jpg [ 11.35 KiB | Viewed 37365 times ]
p1.jpg
p1.jpg [ 15.21 KiB | Viewed 37365 times ]
Author:  baby3w [ Thu Jul 04, 2013 5:24 am ]
Post subject:  Re: ps move why?
I basically solved the problem, out of a new question

I must follow this order can only be

This sequence is fixed it?
Right
Left
Head

I'll swap positions confusion

Attachments:
sx.jpg
sx.jpg [ 60.4 KiB | Viewed 37344 times ]
Author:  vmaslov [ Sun Jul 07, 2013 2:30 am ]
Post subject:  Re: ps move why?
baby3w wrote:
I should follow the body, or the first track PS MOVE？

First, you should track the body, so the positions of the motion controllers are known.
Next, you match the controllers with the cameras. For that, navigate to the frame where the actor is aiming at camera (pointing the sphere of PS Move controller towards the camera), select the appropriate camera in toolbar, and press "Match with camera" button.
Finally, you apply the orientation data of the controller to a bone. Attach the controller to an appropriate bone, set region of interest, navigate to a frame within ROI, where the actor bone's orientation is well visible, manually adjust the model bone's orientation, and hit "Apply motion data" button.

baby3w wrote:
This sequence is fixed it?
Right
Left
Head

The sequence of controllers in "Motion controllers" tab is determined by their order in iPiVideo file, which is determined by how you arrange them in iPi Recorder. You can reorder cameras and controllers in iPi Recorder, at the Setup stage - just drag and drop the screens.
Author:  pas [ Thu Sep 05, 2013 11:29 pm ]
Post subject:  Re: ps move why?
You need to point both your arms at the sensor,
that is the frame where you then press match with camera,
That sets the horizontal orientation,.
Then press apply motion data.
Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/