I have a laptop with a GeForce GTX 680M graphics card. According to the benchmark, it should be performing at about 3.4 frames per second. But it is tracking at .16 fps, and that is with the lowest resolution, and no head or shoulder or feet tracking or ground collisions. I've tried every possible scenario, and that frame rate is the best I can get. It seems that ipi is not using the GeForce graphics card. How do I fix that?

Also, I am using 2 kinects. I have an intel Core i7 quad processor, 32 GB of ram. Should be plenty enough for better results.

Hi
Most probably Mocap Studio is running on the integrated graphics instead of GTX 680M. You should adjust the settings in NVIDIA control panel or elsewhere to force using NVIDIA graphics with Mocap Studio (iPiMocapStudio.exe). Look in these topics for possible solutions:
http://forum.ipisoft.com/viewtopic.php?f=5&t=8192
http://forum.ipisoft.com/viewtopic.php?f=2&t=7475

Thank you very much. That first link solved my problem.