| ipisoft.com https://forum.ipisoft.com/ |
|
| Exclude or Deactivate Camera https://forum.ipisoft.com/viewtopic.php?f=4&t=6853 |
Page 1 of 1 |
| Author: | Greenlaw [ Thu Feb 28, 2013 5:59 pm ] |
| Post subject: | Exclude or Deactivate Camera |
It happens rarely but, every now and then, a mismatch with a point cloud can occur which upsets the smooth flow of a motion during tracking. I was thinking it might be a useful feature in this situation if a user could temporarily deactivate one or more point clouds from tracking for the range of frames where there is a problem. Once clear of the problem range, the deactivated point cloud could be re-activated again for the remainder of tracking. Thanks for listening. G. |
|
| Author: | gfrast [ Thu Feb 28, 2013 11:50 pm ] |
| Post subject: | Re: Exclude or Deactivate Camera |
thought about the same. happens that a body part might pop out of its position quite early when you start the tracking, which means you have to re-track the entire skeleton for the whole shot to correct that bodyparty (as far as i know). would be nice if you could exclude bones for tracking and correction, and therefore speed up the entire tracking process. |
|
| Author: | foy [ Wed Mar 06, 2013 10:00 am ] |
| Post subject: | Re: Exclude or Deactivate Camera |
I was actually just posting this exact same thing albeit from a slightly different angle. The processing time on 8 cameras is quite a bit longer than the 4 we have been testing with. I would love to have the ability of ignoring 1 or more cameras at the click of a button before processing. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|