ipisoft.com
https://forum.ipisoft.com/

Cant even load recorded data.
https://forum.ipisoft.com/viewtopic.php?f=5&t=6232		 Page 1 of 2
Author:  Fishypants [ Mon Aug 13, 2012 2:00 am ]
Post subject:  Cant even load recorded data.
Hey, I'm evaluating this software, got everything installed and running, recorded a take with IPI Recorder and saved it out. Tried dragging and dropping / Selecting New from IPI Mocap Studio, and I get the following error:

"Cannot Open File:
Device does not support multi-level texture width and height values that are not powers of 2.
Parameter name: numberLevels"

WTF? Any ideas?
Author:  vmaslov [ Mon Aug 13, 2012 2:21 pm ]
Post subject:  Re: Cant even load recorded data.
Hi
Please provide us with additional info:
* iPi Mocap Studio version
* Video card model (or at least graphics chipset)
* OS version and bitness
* What's your cameras configuration used for recording
Author:  Fishypants [ Mon Aug 13, 2012 2:34 pm ]
Post subject:  Re: Cant even load recorded data.
Hey Vmaslov, my specs are:

IPI recorder and mocap studio ver 2.0 (whatever the latest is on the website)
Win 7 x64
nVidia GTX 560M
I'm using a single Kinect setup just to test out at the moment.

Not sure what the issue is, but it definitely doesn't like something about my config . .
Author:  Fishypants [ Tue Aug 14, 2012 3:33 pm ]
Post subject:  Re: Cant even load recorded data.
Any ideas? I'm thinking about purchasing some PS Eye cameras, but I want to test that I can get the software working with my current setup first.
Author:  Michael Nikonov [ Tue Aug 14, 2012 10:31 pm ]
Post subject:  Re: Cant even load recorded data.
This is very strange error. We cannot reproduce it (which does not nessesary mean that the problem is not there).

What can be different in your system from other peoples' systems?

Could it be that you occasionally disabled your GTX 560m video card and you are using integrated graphics when you see this error?

Maybe an update for video drivers can help?

Are you using Parallels or VMware virtualization for running our software?
Author:  Fishypants [ Tue Aug 14, 2012 11:16 pm ]
Post subject:  Re: Cant even load recorded data.
Hey Michael,

Not sure what could be different about it. It's all stock. I haven't disabled the graphics card in it. I will try to update the drivers and see if that helps.
Author:  Fishypants [ Wed Aug 15, 2012 6:59 am ]
Post subject:  Re: Cant even load recorded data.
Yeah, drivers are all up to date. Even tried uninstalling and reinstalling to see if that would fix it. No luck . . . :(
Author:  Fishypants [ Wed Aug 15, 2012 12:04 pm ]
Post subject:  Re: Cant even load recorded data.
Hmmm, apparently I was wrong about my graphics card. It's an nvidia geforce gt 425M. It has DirectX 11 support and on nvidia's site it says shader model 5.0? This should be sufficient right?

http://www.geforce.com/hardware/desktop ... m/features
Author:  vmaslov [ Wed Aug 15, 2012 9:02 pm ]
Post subject:  Re: Cant even load recorded data.
Fishypants wrote:
Not sure what could be different about it. It's all stock. I haven't disabled the graphics card in it.

The fact is your laptop has 2 video chips. One is high performance NVIDIA and the second is low performance integrated Intel. NVIDIA Optimus technology automatically switches between these two graphics chips depending on current activity (3d game or office apps). However, it may not decide to use NVIDIA chip when running iPi Mocap Studio. If this is the case, then you should do it manually. Usually there is some Fn key for switching the graphics chip.
Author:  Draxxuss [ Wed Aug 15, 2012 10:18 pm ]
Post subject:  Re: Cant even load recorded data.
how would you normally switch a graphic chip? I've never had to do that. I can't see a function key for it.

http://www.geforce.com/hardware/noteboo ... escription
my vid card for my laptop.
Page 1 of 2 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/