ipi Recorder3 doesnt detect 2nd Kinect

sagarlonkar11 · **Joined:** Tue Mar 10, 2015 8:03 pm **Posts:** 6

Hi hope you all are doing good.

I am not able to read 2nd kinect 2 in ipi recorder 3
does any one know what might be the problem.
I am not even getting any error while plugging it in
If i connect it separately it works properly. but connected it with together it doesnt work.
I also have met all the specification which is mentioned on website .

Please check the attached image

Please help me its urgent.
Thanks.

vmaslov · **Posted:** Wed Mar 11, 2015 3:22 pm

Hi

As I've answered you by email:

Quote:

Microsoft Kinect 2 SDK supports only single device. And we cannot overcome this limitation on our end.
Thus, you need to connect each of the sensors to a separate PC and use the distributed recording feature.

Actually, this limitation is noted both on the web site and in docs:
http://ipisoft.com/software/basic-edition/ (see Additional Requirements section in Recording block)
http://docs.ipisoft.com/Depth_Sensors_Comparison

sagarlonkar11 · **Joined:** Tue Mar 10, 2015 8:03 pm **Posts:** 6

Thanks for the prompt reply..I will try connecting it with two different computers

vmaslov wrote:

Hi

As I've answered you by email:

Quote:

Microsoft Kinect 2 SDK supports only single device. And we cannot overcome this limitation on our end.
Thus, you need to connect each of the sensors to a separate PC and use the distributed recording feature.

Actually, this limitation is noted both on the web site and in docs:
http://ipisoft.com/software/basic-edition/ (see Additional Requirements section in Recording block)
http://docs.ipisoft.com/Depth_Sensors_Comparison

sagarlonkar11 · **Joined:** Tue Mar 10, 2015 8:03 pm **Posts:** 6

Hi, the ipi recorder I use doesn't show slave option on top .. Which version should I use ??

sagarlonkar11 wrote:

Thanks for the prompt reply..I will try connecting it with two different computers

vmaslov wrote:

Hi

As I've answered you by email:

Quote:

Microsoft Kinect 2 SDK supports only single device. And we cannot overcome this limitation on our end.
Thus, you need to connect each of the sensors to a separate PC and use the distributed recording feature.

Actually, this limitation is noted both on the web site and in docs:
http://ipisoft.com/software/basic-edition/ (see Additional Requirements section in Recording block)
http://docs.ipisoft.com/Depth_Sensors_Comparison

vmaslov · **Posted:** Wed Mar 11, 2015 3:39 pm

The latest, of course :)
Buttons related to distributed recording are located at the RECORD tab in case you've missed that.

sagarlonkar11 · **Joined:** Tue Mar 10, 2015 8:03 pm **Posts:** 6

Oh wonderful .. Thanks I got that ..
Thanks for your help

ipi Recorder3 doesnt detect 2nd Kinect

Who is online